Email this article 
The Effect of the Introduction of Detonation Nanodiamonds on the Physical and Mechanical Characteristics of Thermoplastic Elastomers
- Authors: Timoshenko M.V.1, Balabanov S.V.1, Sychov M.M.1,2, Koshevaya K.S.1, Dolmatov V.Y.3, Britov V.P.2
-
Affiliations:
- Institute of Silicate Chemistry, Russian Academy of Sciences
- St. Petersburg State Institute of Technology (Technical University)
- Special Design and Technological Bureau “Technologist”
- Issue: Vol 49, No 3 (2023)
- Pages: 363-368
- Section: Articles
- URL: https://rjonco.com/0132-6651/article/view/663331
- DOI: https://doi.org/10.31857/S0132665122600868
- EDN: https://elibrary.ru/SLARWT
- ID: 663331
Cite item
Open Access
Access granted
Subscription Access
Abstract
Thermoplastic elastomers (TPEs) reinforced with detonation nanodiamonds (DNDs) based on styrene-butadiene rubber are developed. The mechanical characteristics of the reinforced compounds with different DND contents are investigated. The developed material shows a 30% increase in compressive strength compared to the unfilled composite and a 10% increase in the tensile strength of the material with the introduction of 0.1% DND.
About the authors
M. V. Timoshenko
Institute of Silicate Chemistry, Russian Academy of Sciences
Email: timoshe-mikhail@mail.ru
199034, St. Petersburg, Russia
S. V. Balabanov
Institute of Silicate Chemistry, Russian Academy of Sciences
Email: timoshe-mikhail@mail.ru
199034, St. Petersburg, Russia
M. M. Sychov
Institute of Silicate Chemistry, Russian Academy of Sciences; St. Petersburg State Institute of Technology (Technical University)
Email: timoshe-mikhail@mail.ru
199034, St. Petersburg, Russia; 190013, St. Petersburg, Russia
K. S. Koshevaya
Institute of Silicate Chemistry, Russian Academy of Sciences
Email: timoshe-mikhail@mail.ru
199034, St. Petersburg, Russia
V. Yu. Dolmatov
Special Design and Technological Bureau “Technologist”
Email: timoshe-mikhail@mail.ru
192076, St. Petersburg, Russia
V. P. Britov
St. Petersburg State Institute of Technology (Technical University)
Author for correspondence.
Email: timoshe-mikhail@mail.ru
190013, St. Petersburg, Russia
References
- Banerjee S.S., Bhowmick A.K. High-temperature thermoplastic elastomers from rubber–plastic blends: A state-of-the-art review // Rubber Chem. Technol. 2017. V. 90. P. 1–36.
- Banerjee S.S., Bhowmick A.K. Novel nanostructured polyamide 6/fluoroelastomer thermoplastic elastomeric blends: Influence of interaction and morphology on physical properties // Polymer. 2013. V. 54. P. 6561–6571.
- Coran A.Y., Patel R. Rubber-Thermoplastic Compositions. Part IV. Thermoplastic Vulcanizates from Various Rubber-Plastic Combinations // Rubber Chem. Technol. 1981. V. 54. P. 892–903.
- Banerjee S.S., Kumar K.D., Sikder A.K., Bhowmick A.K. Nanomechanics and Origin of Rubber Elasticity of Novel Nanostructured Thermoplastic Elastomeric Blends Using Atomic Force Microscopy // Macromol. Chem. Phys. 2015. V. 216. P. 1666–1674.
- Wang H., Wang Z., Wang X., Wang L., Cai Y., Hong K., Sun L., Lu G., Zhao D., Li Z. Styrene-butadiene-styrene copolymer-compatibilized interfacial-modified graphene oxide with mechanical and electrical properties // J. Thermoplastic Composite Materials. 2017. V. 30. P. 1228–1241.
- Hofmann D., Thomann R., Mülhaupt R. (2017). Thermoplastic SEBS Elastomer Nanocomposites Reinforced with Functionalized Graphene Dispersions // Macromolecular Materials and Engineering. 2018. V. 303 P. 1700324.
- Amini M., Ramazani S.A.A., Haddadi S.A., Kheradmand A. Mechanical, rheological and oxygen barrier properties of ethylene vinyl acetate/diamond nanocomposites for packaging applications // Diamond and Related Materials. 2019. V. 99. P. 107523.
- Ivanoska-Dacikj A. Carbon-Based Nanofiller and Their Rubber Nanocomposites // Fabrication Methods of Carbon-Based Rubber Nanocomposites. 2019. P. 27–47.
- Maitra U., Prasad K.E., Ramamurty U., Rao C.N.R. Mechanical properties of nanodiamond reinforced polymer-matrix composites // Solid State Commun. 2009. V. 149 P. 1693–1697.
- Ullah M., Kausar A., Siddiq M., Subhan M., Abid Zia M. Reinforcing effects of modified nanodiamonds on the physical properties of polymer-based nanocomposites: A review // Polym – Plast. Technol. Eng. 2015. V. 54. P. 861–879.
- Ayatollahi M.R., Alishahi E., Doagou-R.S., Shadlou S. Tribological and mechanical properties of low content nanodiamond/epoxy nanocomposites // Compos. Part B Eng. 2012. V. 43. P. 3425–3430.
- Mochalin V.N., Gogotsi Y. Nanodiamond-polymer composites // Diam. Relat. Mater. 2015. V. 58. P. 161–171.
- Kuasar A. Structure and chemistry of polymer/nanodiamond composites. Hybrid polymer composite materials applications // Woodhead Publishing. 2017. P. 1–21.
- Shenderova O. A. Detonation Nanodiamonds // Science and Applications. 2014. P. 346.
- Kislitsyn V.D., Mokhireva K.A., Shadrin V.V., Svistkov A.L. Research and modeling of viscoelastic behavior of elastomeric nanocomposites // PNRPU Mechanics Bulletin. 2021. № 2. P. 76–87.
- Shvidchenko A.V., Eidelman E.D., Vul’ A.Ya., Kuznetsov N.M., Stolyarova D.Yu., Belousov S.I., Chvalun S.N. Colloids of detonation nanodiamond particles for advanced applications // Advances in Colloid and Interface Science. 2019. V. 268. P. 64–81.
- Бернхардт Э. Переработка термопластичных материалов. М.: Госхимиздат, 1962. 747 с.
- Timoshenko M.V., Balabanov S.V., Sychev M.M., Nikiforov D.I. Thermoplastic Elastomer for 3D Printing by Fused Deposition Modeling // Polym. Sci. Ser. A. 2021. V. 63. P. 652–656.
- Dolmatov V.Yu. Detonation-synthesis nanodiamonds: synthesis, structure, properties and applications // Russian Chemical Reviews. 2007. V. 76. P. 339–360.
- Dolmatov V.Yu. Composition materials based on elastomer and polymer matrices filled with nanodiamonds of detonation synthesis // Nanotechnologies in Russia. 2009. V. 14. P. 556–575.
