Іздеу

Шығарылым
Атауы
Авторлар
Approaches to determining the limiting rate of selective laser melting of metals and alloys
Chuvildeev V., Semenycheva A., Shotin S., Gryaznov M.
The effect of nitriding temperature on the formation of surface layers of vanadium-titanium alloy Ti–6Al–4V
Vorobyev V., Gladysheva V., Bystrov S., Bykov P., Bayankin V., Ulyanov A.
Influence of cooling rate from the β-region on phase transformations in the Zr–2.5Nb alloy
Yarkov V., Pastukhov V., Zorina M., Soloveva S., Redikultsev A., Lobanov M.
Magnetic and Magnetocaloric Properties of Bulk and Rapidly Quenched GdTbDyHoEr high-entropy alloys
Svalov A., Neznakhin D., Arkhipov A., Andreev S., Rusalina A., Medvedev A., Beketov I., Pasynkova A., Kurlyandskaya G.
Influence of Si on the Structure and Martensitic Transformation in Deformed Ni–Mn–Ga Alloys
Musabirov I., Gaifullin R., Safarov I., Galeyev R., Afonichev D., Kirilyuk K., Koledov V., Mashirov A., Mulyukov R.
Al-40Sn ALLOY PRODUCED BY SELECTIVE LASER MELTING OF A MIXTURE OF ELEMENTARY POWDERS
Rusin N., Skorentsev A., Akimov K.
On the Precipitation of the -Phase {111} Al Plates in the Al–Cu–Mg Alloy
Zuiko I., Gazizov M., Kaibyshev R.
Influence of Low-Energy High-Current Electron Beam Exposure on the Phase Composition and Corrosion Resistance of the AM60 Magnesium Alloy
Akimov K., Ivanov K., Figurko M.
Electrical resistance, magnetic and thermoelectric properties of the Heusler alloy Co2TiAl obtained by self-propagating high-temperature synthesis
Busurina M., Karpov A., Andreev D., Boyarchenko O., Morozov Y., Ikornikov D., Sytschev A.
Thermal And Spin-Orbital Effects Under The Action Of Current On Spin Valves Containing β-Ta and NiFeCr alloy layers
Naumova L., Zavornitsyn R., Milyaev М., Germizina А., Maksimova I., Chernyshova Т., Pavlova A., Proglyado V., Ustinov V.
Ieffect of Ultrasonic Impact Treatment on the Microstructure and Fatigue Life of 3D-Printed Titanium Alloy Ti–6Al–4V
Perevalova O., Panin A., Kazachenok M., Martynov S.
Effect of Mechanical Activation Time on the Density of Fine-Grained Tungsten Alloy 90W–7Ni–3Fe, Obtained by Spark Plasma Sintering
Chuvil’deev V., Nokhrin A., Boldin M., Lantsev E., Sakharov N.
Formation of Deformation Bands during Impact Indentation of an Al–6Mg Alloy
Shibkov A., Zolotov A., Denisov A., Gasanov M.
Effect of Grain Size on the Hydrogen-Induced Ductility Loss of a Multicomponent CoCrFeMnNi Alloy
Astafurova E., Nifontov A.
Electron beam impact on microstructure and microhardness of Ti–6Al–4V titanium alloy produced by wire electron-beam additive manufacturing technology and selective laser alloying at simulation of electronic-beam welding
Perevalova O., Panin A., Kazachenok M., Martynov S.
Structural Investigations and Rheology of Convergence of Thick-Wall Shells from Al–Mg Alloy
Brodova I., Shirinkina I., Astafiev V., Balushkin S., Kulikov G., Simonov A.
The effect of vanadium on the performance properties of Al–2.3%V alloy manufactured by 3D printing
Shevchenko V., Eselevich D., Popov N., Baklanov M., Vichuzhanin D.
Characterization of Nanosized Clusters and Transition Layers of Contacting - and '-Phases in a Ni-Based Superalloy
Rogozhkin S., Ber L., Khomich A.
The effect of nanosecond laser treatment on the structure and hardness of the Zr–1%Nb alloy
Petrova A., Brodova I., Rasposienko D., Valiullin A., Kuryshev A., Afanasyev S., Balakhnin A., Naimark O.
Structural and phase transformations and crystallographic texture in industrial Ti–6Al–4V alloy with globular morphology of α-phase grains: plate’s transverse section along rolling direction
Pushin V., Rasposienko D., Gornostyrev Y., Kuranova N., Makarov V., Svirid A., Naimark O., Balakhnin A., Oborin V.
Effect of Field Annealing on Magnetic Properties of Magnetic Soft Iron–Germanium Alloys
Lukshina V., Timofeeva A., Shishkin D., Gornostyrev Y., Ershov N.
THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE Al–Mg–Fe–Ni–Zr–Sc ALLOY AFTER MULTIDIRECTIONAL FORGING
Kishchik A., Aksenov S., Kishchik M., Demin D., Churyumiv A., Mikhaylovskaya A.
The Microstructural and Phase Evolution of the 3D Printed Ti–6Al–4V Alloy during Mechanical Loading
Panin A., Kazachenok M., Kazantseva L., Perevalova O., Martynov S.
Effect of mechanical alloying modes on the microstructure, phase composition and mechanical properties of powder high-entropy Co–Cr–Fe–Ni–Ti alloys
Berezin М., Zaitsev А., Romanenko B., Loginov Р.
Structural and phase transformations and crystallographic texture in industrial Ti–6Al–4V alloy with globular morphology of α-phase grains: plate’s transverse section perpendicular to rolling direction
Pushin V., Rasposienko D., Gornostyrev Y., Kuranova N., Makarov V., Svirid A., Naimark O., Balakhnin A., Oborin V.
STUDY OF LOW-TEMPERATURE THERMOMECHANICAL BEHAVIOR OF THE Ti-18Zr-15Nb SUPERELASTIC ALLOY UNDER DIFFERENT TEMPERATURE-RATE CONDITIONS
Derkach M., Sheremetev V., Korotitskiy A., Prokoshkin S.
Effect of alternate irradiation with O+ and n+ ions on the composition, structure, and electrochemical properties of a Ti–Al–V alloy
Vorob'ev V., Gladysheva V., Bykov P., Bystrov S., Klimova I., Syugaev A., Kolotov А., Bayankin V.
Влияние температурно-скоростных параметров обработки на структурно-фазовое состояние и свойства сплава на основе алюминида титана Ti2AlNb
Демаков С., Водолазский Ф., Илларионов А., Шабанов М., Карабаналов М.
Effect of equal channel angular pressing on the structure and mechanical properties of Al–6Ca–3Ce alloy
Andreev V., Barykin M., Karelin R., Komarov V., Naumova E., Rogachev S., Tabachkova N.
Effect of chromium content on the thermal stability of single-phase submicrocrystalline Ni–Cr alloys
Karamyshev K., Voronova L., Chashchukhina T., Degtyarev M.
The Influence of Technological Parameters on the Structure and Properties of the Selective Laser Melting Al–Cu–Mg–Si Alloy
Petrova A., Klenov A., Brodova I., Rasposienko D., Pilshikov A., Orlova N.
Surface modification of Zr–Nb alloy by nanosecond pulse laser processing
Petrova A., Brodova I., Astafiev V., Rasposienko D., Kuryshev A., Balakhnin A., Uvarov S., Naimark O.
A Study of the Structure and Magnetic Properties of the Soft Magnetic Ni80Cr20 Alloy Manufactured by Additive Technology
Zhukov A., Manninen S., Tit M., Olisov A., Knyazyuk T., Kuznetsov P.
Structural studies and convergence scenario for a shell made of Mg–Zn–Zr magnesium alloy
Shirinkina I., Brodova I., Astafjev V., Dolgih S., Gaan K., Novoselov V.
Decomposition processes of the metastable β-phase in titanium alloys of the transition class
Popov А., Petгova А., Narigina I., Popov N., Petrov R., Lugovaya К.
Evolution of the Structure and Phase Composition of a High-Entropic CoCrFeNiCu Alloy during Prolong Annealing
Poliakov M., Kovalev D., Volkova L., Vadchenko S., Rogachev A.
Structural-phase transformations and crystallographic texture in commercial Ti–6Al–4V alloy with globular morphology of α-phase grains: the rolling plane
Pushin V., Rasposienko D., Gornostyrev Y., Kuranova N., Makarov V., Marchenkova E., Svirid A., Naimark O., Balakhnin A., Oborin V.
Simulation of Rolling in a Magnetostriction Fe–Ga Alloy
Milyutin V., Nepriakhin S., Gervasyeva I.
The effect of a Sc : Zr ratio on the corrosion resistance of cast Al–Mg alloys
Kozlova N., Nokhrin A., Chuvil’deev V., Shadrina Y., Bobrov A., Chegurov M.
Regularities and features in the behavior of electrical and magnetic properties of Co2FeZ (Z = Al, Si, Ga, Ge, Sn, Sb) half-metallic ferromagnetic heusler alloys
Perevozchikova Y., Irkhin V., Semiannikova A., Marchenkov V.
Mechanical Properties of High Entropy Alloys Based on Rare Earth Elements with Yttrium and Scandium
Sipatov I., Korolev O., Ignatieva E., Marshuk L., Gelchinskiy B., Rempel A.
DECOMPOSITION OF THE METASTABLE BETA PHASE IN HIGH-STRENGTH TITANIUM ALLOYS VST5553, Ti–10V–2Fe–3Al, and BETA-21S
Kalienko M., Zhelnina A., Popov A.
On the effect of heating of two-phase alloyed brasses on morphological peculiarities of intermetallic inclusions
Svyatkin A., Gnusina A., Gryzunova N.
Fatigue Resistance of the Sheets of Heat-Resistant Titanium Alloys
Kalienko M., Popov A., Volkov A., Leder M., Zhelnina A.
Нәтижелер 44 - 1/44
Сыбырсөздер:
  • Негізгі сөздер тіркелімге сезімтал< / li>
  • Ағылшын предлогтары мен одақтары еленбейді
  • Әдепкі бойынша іздеу барлық негізгі сөздер үшін жасалады (агенс AND экспериенцер)
  • Белгілі бір терминді табу үшін OR қолданыңыз. білім беру OR оқыту
  • мысалы, күрделі сөз тіркестерін жасау үшін жақшаларды қолданыңыз. мұрағат ((журналдар OR конференциялар) NOT диссертациялар)
  • Нақты фразаны табу үшін, мысалы, тырнақшаларды қолданыңыз. "ғылыми зерттеулер"
  • сөзді - (сызықша) немесе not операторының көмегімен алып тастаңыз; мысалы. сұлулық байқауы< / em > немесе сұлулық байқауы< / em > < / li>
  • мысалы, нұсқа ретінде * қолданыңыз. ғылым* "ғылыми","ғылыми"және т. б. сөздерді қамтиды< / li> < / < / к-сі>