Influence of the Method of Graphene Introduction on Physical and Mechanical Properties of Thermoplastic Elastomers

M. V. Timoshenko; Тимошенко М. В.; S. V. Balabanov; Балабанов С. В.; M. M. Sychov; Сычев М. М.

doi:10.31857/S0132665123600243

Influence of the Method of Graphene Introduction on Physical and Mechanical Properties of Thermoplastic Elastomers

作者: Timoshenko M.V.¹, Balabanov S.V.¹, Sychov M.M.¹^,2
隶属关系:
1. Institute of Silicate Chemistry, Russian Academy of Sciences, 199034, St. Petersburg, Russia
2. St. Petersburg State Institute of Technology (Technical University), 190013, St. Petersburg, Russia
期: 卷 49, 编号 5 (2023)
页面: 546-553
栏目: Articles
URL: https://rjonco.com/0132-6651/article/view/663351
DOI: https://doi.org/10.31857/S0132665123600243
EDN: https://elibrary.ru/OMVKWX
ID: 663351

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

A method for reinforcing a compound based on styrene-butadiene thermoplastic elastomer has been developed. The mechanical characteristics of reinforced compounds have been studied. A comparative analysis of various methods for introducing a nanofiller into a polymer matrix has been carried out. The developed technique shows an increase in the compressive strength of the composition by 50%, as well as tensile strength by 20%.

关键词

thermoplastic elastomer, graphene, TPE, reinforcement, physical and mechanical characteristics, ultrasound, distribution

作者简介

M. Timoshenko

Institute of Silicate Chemistry, Russian Academy of Sciences, 199034, St. Petersburg, Russia

Email: timoshe-mikhail@mail.ru
Россия, 199034, Санкт-Петербург, наб. Макарова, 2

S. Balabanov

Institute of Silicate Chemistry, Russian Academy of Sciences, 199034, St. Petersburg, Russia

Email: timoshe-mikhail@mail.ru
Россия, 199034, Санкт-Петербург, наб. Макарова, 2

M. Sychov

Institute of Silicate Chemistry, Russian Academy of Sciences, 199034, St. Petersburg, Russia; St. Petersburg State Institute of Technology (Technical University), 190013, St. Petersburg, Russia

编辑信件的主要联系方式.
Email: timoshe-mikhail@mail.ru
Россия, 199034, Санкт-Петербург, наб. Макарова, 2; Россия, 190013, Санкт-Петербург, Московский пр., 26

参考

Banerjee S.S., Bhowmick A.K. High-temperature thermoplastic elastomers from rubber–plastic blends: A state-of-the-art review // Rubber Chem. Technol. 2017. V. 90. P. 1–36.
Banerjee S.S., Bhowmick A.K. Novel nanostructured polyamide 6/fluoroelastomer thermoplastic elastomeric blends: Influence of interaction and morphology on physical properties // Polymer. 2013. V. 54. P. 6561–6571.
Coran A.Y., Patel R. Rubber-Thermoplastic Compositions. Part IV. Thermoplastic Vulcanizates from Various Rubber-Plastic Combinations // Rubber Chem. Technol. 1981. V. 54. P. 892–903.
Banerjee S.S., Kumar K.D., Sikder A.K., Bhowmick A.K. Nanomechanics and Origin of Rubber Elasticity of Novel Nanostructured Thermoplastic Elastomeric Blends Using Atomic Force Microscopy // Macromol. Chem. Phys. 2015. V. 216. P. 1666–1674.
Mochalin V.N., Gogotsi Y. Nanodiamond–polymer composites // Diamond and Related Materials. 2015. V. 58. P. 161–171.
Dolmatov V.Y. Composite materials based on elastomer and polymermatrices filled with nanodiamonds of detonation synthesis // Nanotechnol. Russ. 2009. V. 4. P. 556–575.
Voznyakovskii A.P., Neverovskaya A.Yu., Otvalko Ja.A., Gorelova E.V., Zabelina A.N. Facile synthesis of 2D carbon structures as a filler for polymer composites // Nanosystems: physics, chemistry, mathematics. 2018. V. 9 (1). P. 125–128.
Liu M., Papageorgiou D.G., Li S., Lin K., Kinloch I.A., Young R.J. Micromechanics of reinforcement of a graphene-based thermoplastic elastomer nanocomposite // Composites Part A: Applied Science and Manufacturing. 2018. V. 110. P. 84–92.